Bunker Hill Wireless Security Camera Setup Guide

If you’ve just unboxed your Bunker Hill security camera wireless setup, you might assume remote viewing works out of the box—just like modern smart cameras. But here’s the hard truth: it doesn’t. Despite bold claims on the packaging, remote access for models like #62368 is anything but simple. You won’t find QR code scanning, cloud syncing, or voice assistant integration. Instead, you’re facing a proprietary system that demands networking know-how—static IPs, port forwarding, and the Asee app—to get your camera online from anywhere. Without these steps, your camera may work locally but fail completely when you try to view it on your phone while away from home.

This guide cuts through the confusion with a step-by-step process that actually works. Whether you’re troubleshooting a failed connection or setting up for the first time, you’ll learn exactly how to make your Bunker Hill camera accessible remotely—and when it might be smarter to walk away and upgrade.

Why Your Bunker Hill Camera Isn’t Truly Wireless

It’s Not a Wi-Fi IP Camera — It’s a Proprietary DVR System

Despite the “wireless” label, Bunker Hill cameras do not connect to your Wi-Fi network like Ring, Arlo, or Wyze cameras. Instead, they transmit video over a private RF signal to a DVR (Digital Video Recorder). The DVR must then be connected to your router via Ethernet cable to access the internet. That means remote viewing depends entirely on the DVR, not the camera.

This architecture creates a major limitation: your camera operates on a closed system using non-standard protocols. There’s no ONVIF support, no RTSP streaming, and no way to integrate with popular platforms like Home Assistant, Blue Iris, or iSpy. You’re locked into the manufacturer’s ecosystem—primarily the Asee mobile app—and if that app can’t do something, neither can you.

Analogy: It’s like buying an iPhone app that only runs on iOS. No amount of tinkering will make it work on Android—and the same goes for Bunker Hill cameras on modern smart home systems.

What You Need Before Starting

Gather Critical Info and Tools

Before touching cables or settings, collect this essential information:

• Model number (e.g., 62368 or 62284) from the DVR or packaging
• Serial number for potential support
• Router admin login (username/password)
• Public IP address (check at whatsmyip.com)
• DVR static IP (e.g., 192.168.1.4)
• Ports to forward: 9000 (media), 8080 (web), 18004 (server)

Without these, you’ll waste hours guessing and troubleshooting.

Required Equipment

• Ethernet cable (to connect DVR to router)
• Computer for initial setup and testing
• Smartphone with Asee app installed (Google Play or App Store)
• Stable broadband connection (minimum 5 Mbps upload)
• Router with port forwarding (avoid ISP-provided modem/router combos—they often lack full control)

Install and Test Cameras Locally First

Verify Video Feed Before Mounting

Never mount a camera without confirming it works:

1. Connect all cameras to the DVR using included cables.
2. Power on the DVR and monitor.
3. Confirm live video appears on the screen.
4. Adjust angles and focus as needed.

If no image appears, check power adapters and cable connections—loose or damaged wires are the most common cause.

Outdoor Mounting Tips

These cameras are not weatherproof. To prevent water damage:

• Install under eaves or overhangs.
• Use the mounting bracket as a drill template.
• Seal cable entry points with electrical tape.
• Avoid direct sunlight and reflective surfaces (like windows at night).
• Mount at least 8–10 feet high to deter tampering.

Configure the DVR for Network Access

Assign a Static IP Address

Your DVR must have a fixed internal IP so port forwarding rules stay consistent.

Steps:

1. On the DVR, go to Main Menu → Network → Static.
2. Enter:
   – IP Address: Same subnet as router (e.g., 192.168.1.4 if router is 192.168.1.1)
   – Subnet Mask: 255.255.255.0
   – Default Gateway: Router’s IP (e.g., 192.168.1.1)
   – DNS: 8.8.8.8 (Google DNS) or router IP
3. Set:
   – Web Port: 8080 (avoid port 80—it conflicts with router admin pages)
   – Media Port: 9000
4. Save and reboot the DVR.

Pro Tip: Write down the static IP and port numbers—you’ll need them for router setup.

Enable Mobile Access on the DVR

Navigate to Devices → Mobile and enter:
– Username: admin (default)
– Password: Your custom password (change from default!)
– Server Port: 18004

Apply settings. This allows the Asee app to communicate with the DVR over the internet.

Set Up Port Forwarding on Your Router

Why Port Forwarding Is Non-Negotiable

Your router acts as a firewall, blocking outside devices from accessing your DVR. Port forwarding opens specific “doors” (ports) so your phone can reach the DVR remotely. Without it, the Asee app will show “Offline” or “Connection Failed.”

Required Port Rules

External Port	Internal Port	Protocol	Device IP	Purpose
9000	9000	TCP/UDP	192.168.1.4	Video/audio streaming
8080	8080	TCP	192.168.1.4	Web browser access
18004	18004	TCP	192.168.1.4	Asee app connection

How to Configure Port Forwarding

1. Open a browser and enter your router’s IP (e.g., 192.168.1.1).
2. Log in with admin credentials.
3. Find Port Forwarding or Virtual Server (location varies by brand).
4. Add each rule above, using your DVR’s static IP.
5. Save and reboot the router.

Warning: Some ISPs block common ports. If 8080 fails, try 8081. Avoid using port 80.

Test If Ports Are Open

Use canyouseeme.org:
1. Enter port 8080.
2. Click “Check.”
3. If successful, you’ll see “Success: I can see your service.”

If blocked, double-check firewall settings or contact your ISP.

Access Your Camera Remotely

Web Browser Access (External Network)

1. On your phone (using cellular data), open a browser.
2. Enter: http://[your_public_ip]:8080
   Example: http://73.123.45.67:8080
3. Log in with:
   – Username: admin
   – Password: Your DVR password

If the page won’t load:
– Confirm ports are forwarded.
– Try Chrome or Firefox.
– On Windows, add the IP to Trusted Sites in Internet Options.

Limitation: Web access may have low frame rates or require outdated plugins.

Asee App Setup on Mobile

1. Install Asee (or ASee Plus) from the App Store or Google Play.
2. Tap Add Device.
3. Enter:
   – Device Name: e.g., “Front Door”
   – IP Address: Your public IP
   – Local IP: DVR’s static IP (e.g., 192.168.1.4)
   – Username: admin
   – Password: DVR password
   – Media Port: 9000
   – Server Port: 18004
4. Tap Save.

If connection fails:
– ✅ Verify DVR is powered and online.
– ✅ Confirm port 18004 is forwarded.
– ✅ Recheck all IP and port entries—typos break everything.
– ✅ Restart DVR and router.
– ✅ Try disabling your router’s SPI firewall temporarily.

One user reported success only after disabling the firewall during setup.

Fix Common Bunker Hill Setup Failures

No Remote Video? Check These First

DVR Has No Internet

• Ensure Ethernet cable is secure.
• Test with a different cable.
• Confirm router has active internet.

Port Forwarding Not Working

• Use canyouseeme.org to test each port.
• Avoid port 80—routers often reserve it.
• Some routers require DMZ mode for testing (not safe long-term).

App Connects But No Video

• Check media port (9000) is open.
• Restart the Asee app.
• Reboot the DVR.

Keep Remote Access Reliable

Handle Dynamic IP Changes

Most home internet plans use dynamic public IPs, which change periodically. When your IP changes, remote access breaks.

Solution: Use Dynamic DNS (DDNS)

1. Sign up at No-IP.com or DynDNS.org.
2. Create a hostname (e.g., mycamera.noip.com).
3. Configure your router or DVR to update the IP automatically.
4. Use the hostname instead of the IP in the Asee app.

This ensures you never lose access.

Maintenance Tips

• Inspect outdoor seals every 3–6 months.
• Clean lenses with a microfiber cloth.
• Check cables for wear.
• Re-test port forwarding after router updates.

When to Upgrade to a Modern Camera

Signs Bunker Hill Is Holding You Back

Replace it if you want:
– ❌ Push notifications for motion
– ❌ Cloud or SD card recording
– ❌ Smart home integration (Alexa, Google, HomeKit)
– ❌ Easy setup without networking skills

This system lacks modern features, security updates, and user-friendly design.

Better Alternatives

Upgrade to:
– Wyze Cam: $25, app-based setup, free cloud clips
– Eufy 2K Indoor: Local storage, no subscription
– Arlo Pro 4: Wire-free, 2K video, smart alerts
– Ring Stick Up Cam: Alexa integration, professional monitoring

These offer QR code setup, reliable apps, and no port forwarding.

---

Final Note: The Bunker Hill security camera wireless setup is possible—but only if you’re technically skilled. For most users, the frustration far outweighs the benefit. If you’ve followed every step and still can’t get remote access, it’s not your fault—the system is outdated. Use this guide as your last effort: static IP, port forwarding, Asee app, DDNS. If it still fails, upgrade to a modern IP camera that delivers on its promises. Security should protect your home—not your sanity.