How to Find QR Code on Security Camera

If you’ve just installed a new security camera or moved into a home with existing smart cameras, you’ve probably encountered the prompt: “Scan the QR code to set up your device.” But what if you can’t find it? The QR code on a security camera is essential for quick pairing with apps like Ring, Google Home, or eufySecurity—but its location isn’t always obvious. And when it’s faded, scratched, or missing entirely, setup can feel impossible.

This guide reveals exactly where to find the QR code on major brands—Ring, Nest, and eufy—without disassembling your camera. You’ll also learn how to bypass scanning altogether using manual setup codes, reset procedures, and app-based workarounds. Whether your camera is brand new, weather-worn, or left behind by a previous homeowner, you’ll regain control fast.

Ring Camera QR Code Location

Back of Camera (Floodlight Cam Plus)

For most Ring Floodlight Cam Plus (Gen 2 and later) models, the QR code is printed on a sticker on the back of the camera unit, just beneath the lens housing. You don’t need to remove the camera from its mount—simply tilt or rotate the camera head to one side and use your phone to capture the rear surface.

🔍 Pro Tip: Shine a flashlight at an angle. Faded or weathered stickers often reflect light differently, making the code visible even if it appears blank under normal lighting.

Some units place the sticker along the bottom edge of the back panel, commonly alongside the model number, serial number, and MAC address. If the camera is mounted tightly under an eave or in a dark area, use your phone’s zoom feature to get a clear shot.

No QR Code? Use 5-Digit Manual Code

Not all Ring cameras use QR codes. The original Ring Floodlight Cam (Gen 1) and some early wired models rely solely on manual setup. If your camera lacks a QR code or the sticker is damaged:

Find the 5-Digit Manual Code:

Located below or next to the QR code area on the back
Enter it in the Ring app when selecting “Set up without scanning”
Follow prompts to complete pairing

✅ Real-World Fix: One user successfully paired a Floodlight Cam Wired Plus with a completely worn-off QR code by entering the 5-digit code found on the same label.

Reset If Camera Won’t Pair

If the camera won’t connect or appears offline despite power:

Perform a Factory Reset:

Locate the reset button on the top of the unit
Press and hold for 30 seconds until the LED flashes red
Release when the light cycles—this indicates the device is in setup mode

⚠️ Warning: A factory reset does not remove account binding. If the camera was previously linked to another user, you must contact Ring Support with proof of ownership (e.g., deed, bill of sale) to transfer control.

Can’t Scan? Try App-Based Discovery

Skip scanning entirely:

Open the Ring app
Tap “Add Device”
Choose “Set up without scanning”
Let the app search for nearby devices

If the camera is powered and within range, it may appear automatically—even without scanning the QR code.

💬 Community Tip: “Open the Ring app and see if it detects the camera via Wi-Fi scan.” – technut2020

Nest Camera QR Code Location

Front Face Near Lens

On Nest Cam Wired Spotlight V2, Nest Cam with Floodlight, and similar models, the QR code is located on a sticker attached to the front face, near the lens. It’s often covered by a thin protective film or placed beside the quick start guide.

📌 Official Note: Google’s installation guide confirms: “The QR code is on the front face of the camera lens.”

You may need to remove the camera from its mount for a clear view—especially if it’s recessed or tightly enclosed. Once unmounted, gently wipe the front with a microfiber cloth to remove dust or smudges that obscure the sticker.

Use 6-Character Setup Code (No QR Needed)

If the front sticker is missing or illegible:

Find the Manual Setup Code:

Turn the camera over
Look on the bottom surface—the 6-character Setup Code is laser-etched or printed there
You may need to disconnect the power cable to rotate and view

❌ Critical: Do not use the serial number. Only the Setup Code works for pairing.

✅ Confirmed by users: “The Setup Code is on the bottom of the camera.” – listairee, MplsCustomer

Reconnect Offline Nest Cameras

If your camera shows a green light but won’t connect:

Do This First:

Unplug and replug the power cable
Reboot your router/modem
Wait 2–5 minutes for automatic reconnection

Only perform a factory reset if these steps fail.

Already Linked to Another Account?

Error: “This camera is already connected to another Google account”

Fix:

Factory reset the camera (hold reset button for 10–15 seconds)
Open Google Home app
Add device as new

💬 Expert Advice: “Restart first. If that fails, reset.” – Brad, EmersonB (Google Community Specialists)

Set Up Without Scanning (Google Home App)

When the QR code is gone:

Tap “Continue without scanning”
Enter the 6-character Setup Code manually
Follow prompts to complete setup

Use the “Show me how” feature in the app for real-time visual guidance.

✅ Pro Tip: Watch the installation video in the app—jump to 1:22 for QR code demo.

eufy Camera QR Code Location

Back, Base, or Inside Battery Compartment

On eufySecurity cameras:
– Wired models: QR code is typically on the back or base
– Battery-powered models: Check inside the battery compartment
– Also found on packaging and Quick Start Guide

📷 Best Practice: Take a photo of the code immediately after unboxing and store it digitally.

Use 6–8 Digit Alphanumeric Code

If scanning fails:

Manual Setup Option:

Look for a 6–8 digit alphanumeric code printed below the QR
Enter in the eufySecurity app under “Set up without scanning”
Ensure correct uppercase/lowercase input

The app also stores codes in the “My Codes” section once registered.

Contact eufy Support (24/7 Help)

Need help? eufy offers full support:

Phone (USA):

eufy Security: 1-800-988-7973
eufy Baby: 1-855-952-0878
eufy Clean/MACH/Health: 1-800-994-3056
ExpertSecure System: 1-888-383-9123

Email:

General: support@eufy.com
Baby: babysupport@eufy.com

Live Chat:

Available 24/7 on eufy.com

✅ Register your device to unlock warranty, firmware updates, and saved codes.

Universal Steps to Find Any Camera’s QR Code

Inspect All Surfaces

Check these spots on any brand:

Front: Near lens (common for Nest)
Back: Behind camera housing (Ring, eufy)
Bottom: May require unmounting (Nest setup code)
Top: Especially on floodlight-style units
Inside battery compartment: For battery-powered models

🔦 Visual Tip: Use a flashlight at a low angle. Scratched or faded ink often becomes visible through reflection.

Clean and Capture Carefully

Do:

Wipe gently with a microfiber cloth
Use phone zoom to capture a clear image
Take multiple photos under different lighting

Don’t:

Scratch with metal tools
Peel stickers unless necessary
Use harsh chemicals

Check Original Packaging

If you still have:
– The original box
– Quick Start Guide
– Installation receipt

The QR code or manual setup code is often printed inside.

✅ Smart Move: Save these documents in a labeled folder or scan them into cloud storage.

Use Manual Code Instead

When the QR is gone, manual code entry works every time:

Brand	Code Type	Location
Ring	5-digit number	Back of camera
Nest	6-character alphanumeric	Bottom of camera
eufy	6–8 digit alphanumeric	Back/base or inside battery

In the app, select “Set up without scanning” and enter the code.

Reset as Last Resort

If the camera won’t respond:

General Reset Steps:

Find the reset button (pinhole or recessed switch)
Press and hold for 15–30 seconds
Wait for LED to blink (indicates pairing mode)

⚠️ Caution: Resetting does not remove account binding. You may still need manufacturer support if the device is locked.

Verify Account Status

Before setting up, confirm:
– The camera is not linked to a previous user
– The device has been removed from prior accounts

For Pre-Owned Homes:

Ask the seller to remove devices before closing
Provide proof of ownership (deed, utility bill) to support
Contact manufacturer support to request transfer

✅ Success Story: One user regained access after the seller removed the Ring Doorbell from their account.

Compare QR Code Locations by Brand

Feature	Ring	Nest	eufy
QR Code Location	Back (behind lens)	Front (near lens)	Back/base or battery compartment
Manual Code Type	5-digit	6-character	6–8 digit alphanumeric
Manual Code Location	Back, near QR	Bottom of camera	Below QR or in app
Reset Button	Top (Floodlight Cam)	Base/side	Pinhole or recessed
Reset Time	~30 sec	~10–15 sec	~10–20 sec
App Used	Ring App	Google Home	eufySecurity
Account Bound?	Yes	Yes	Yes
Offline Setup?	Yes	Yes	Yes
Live Chat Support	Limited	Yes	Yes (24/7)

Final Recommendations

For Homeowners:

Take photos of all codes immediately
Save original boxes and manuals
Register devices to your account
Update firmware regularly

For Setup Success:

Try app-based discovery first
Use manual code if QR fails
Reset only when necessary
Contact support if account-locked

✅ Ultimate Pro Tip:
In 95% of cases, reset the camera, then enter the manual code in the app. This bypasses scanning issues, connectivity glitches, and most pairing errors.

The QR code on a security camera is just one path to setup. Knowing where to look—and what to do when it’s gone—gives you full control. Whether it’s a Ring, Nest, or eufy, the solution is always within reach.

Help